Bore Tech Inc

£12.84

Click to Select
Quantity

Product Details

BORE TECH INC

Bore Tech's ELIMINATOR is the patent pending bore cleaner that has taken the shooting industry by storm. As a result of advanced chemical research, ELIMINATOR surpasses the rigorous demands of the modem day shooter and is environmentally safe.

ELIMINATOR QUICKLY REMOVES: Carbon, Copper, Lead, Corrosive Residue

ELIMINATOR IS 100%: Barrel Safe, Odour Free, Non-Hazardous, Bio-Degradable

ELIMINATOR's proprietary formulation is accomplished through a new combination of chemicals never before introduced to the shooting industry. ELIMINATOR has the ability to simultaneously cut through the layers of carbon and copper fouling that have accumulated on the barrel‘s wall with each shot fired.

ELIMINATOR begins its assault on fouling by chemically loosening and releasing carbon deposits from the barrel's surface. ELIMINATOR utilizes a blend of chemical surfactants that break-up and remove carbon deposits with ease. No tedious brushing and patching needed, even on stubborn build-up.

In a two step process, ELIMINATOR first breaks down the copper by reconfiguring its electronic state. Then, by a specially developed binding agent, ELIMINATOR acts like a magnet and selectively attracts and captures the copper in a suspended form rendering it unable to redeposit in the firearms bore. The continued rapid and complete extraction of any remaining carbon and copper progresses and cleans unimpeded, undiluted, full strength without becoming saturated with carbon and copper molecules.

Another benefit of ELIMINATOR is it also contains a rust preventative, which shields and conditions the firearms bore after cleaning. Just dampen your last patch with ELIMINATOR and your bore is protected from rust and corrosion.

Whether your barrel is steel, stainless steel, or lined, ELIMINATOR is 100% SAFE for an infinite period of time.

Bore Tech‘s ELIMINATOR is without a doubt the premier, state of the art bore cleaner that quickly eliminates carbon and copper fouling without the hazards, toxicity, and odours found in competitive based cleaners. You can trust Bore Tech to put this much attention and detail into a product. No “Snake Oil" here.

Bore Tech...We set the standards

USE INSTRUCTIONS
UNLOAD FIREARM
1) Wet 3 to 4 patches with ELIMINATOR and push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting NYLON brush saturated with ELIMINATOR.
3) Then repeat step 1 and let ELIMINATOR soak 3 to 5 minutes.
4) Finally, push dry patches through the bore until they come out clean.
5) Before storing firearm, dampen a patch with ELIMINATOR and push through bore.
6) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Cu+2 COPPER REMOVER is the brand new patent pending bore cleaner that surpasses the rigorous demands of the modern day shooter and an environmentally minded society. Through advanced chemical research, Cu+2 COPPER REMOVER not only cleans copper fouling faster than any traditional petro-ammonia solvents, it is also 100%: Barrel Safe, Odour Free, Ammonia Free, Non-Hazardous, Bio-Degradable, and Petroleum-Free

Cu+2 COPPER REMOVER's proprietary formulation and cleaning process is designed for one thing, continued, rapid and complete extraction of any copper fouling in your firearm‘s bore. The key to the copper removing properties is found in a unique and rapid two-step process. In the first step, the breakdown of the copper is achieved by reconfiguring the copper‘s electronic state. Metallic copper with a neutral charge, Cu0, is oxidized or broken down to its cupric state, Cu+2. Then in the second step, a specially enhanced binding agent within Cu+2 acts like a magnet, and selectively attracts and captures the copper, rendering it unable to redeposit in the firearms bore. In “shooters” terms, instantaneous blue patches and a clean barrel.

Cu+2 COPPER REMOVER also contains a rust preventative, which shields and condition the firearm‘s bore after cleaning. Just dampen your last patch with Cu+2 COPPER REMOVER and your bore is protected from rust and corrosion.

Whether your barrel is steel, stainless steel, or lined, Cu+2 COPPER REMOVER is 100% safe for an infinite period of time.

BORE-TECH's Cu+2 COPPER REMOVER is without a doubt the premier, state of the art copper remover that quickly eliminates copper fouling without the hazards, toxicity, and odours found in competitive based cleaners.

ls your gun Bore Tech Cu+2 clean?

USE INSTRUCTIONS
UNLOAD FIREARM
1) Wet 3 to 4 patches with Cu+2 COPPER REMOVER and push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting NYLON brush saturated with Cu+2 COPPER REMOVER.
3) Then, repeat Step 1 and let Cu+2 COPPER REMOVER soak 3 to 5 minutes.
4) Finally, push dry patches through the bore until they come out clean.
5) Before storing firearm, dampen a patch with Cu+2 COPPER REMOVER and push through the bore.
6) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Bore Tech's C4 CARBON REMOVER is the newest patent pending addition in Bore Tech's technologically advanced and innovative line of chemicals. The C4 CARBON REMOVER's advanced chemical formulation is a new combination of chemicals never before introduced to the shooting industry. Following extensive research and development, a carbon removing solution that far surpasses the rigorous demands of the modern day shooter and environmentally minded society has been devised.

Unlike competitive solvents, the C4 CARBON REMOVER'S proprietary non-flammable, non-hazardous and 100% biodegradable formulation does not merely act as a liquid carrier relying on mechanical action to provide cleaning, it relies on a sophisticated blend of surfactants, penetrants, suspending agents and chemical action to remove the stubborn carbon deposits. This special formulation provides a deep cleaning approach that is extremely quick and powerful. It eliminates the time consuming and labour intensive cleaning of the past. Just wet the bore or soak your parts for a few minutes and then patch or wipe dry. It is that effective and easy.

The C4 CARBON REMOVER is ideal for rifle barrels, bolt faces, flash suppressors, compensators, silencers, chamber throats, revolver cylinders, gas pistons and any other place extreme carbon fouling is found. Bore Tech's C4 CARBON REMOVER also has the advantage of neutralizing and removing corrosive salts from surplus ammunition and black powder shooting.

From Carbon Black to Shinny as a Diamond... Bore Tech‘s C4 CARBON REMOVER sets a new standard in gun cleaning.

USE INSTRUCTIONS
UNLOAD FIREARM
1) Wet 3 to 4 patches with C4 CARBON REMOVER and push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting brush saturated with C4 CARBON REMOVER.
3) Then, repeat Step 1 and let C4 CARBON REMOVER soak 5 to 10 minutes.
4) Finally, push dry patches through the bore until they come out clean.
5) Before storing firearm, dampen a patch with C4 CARBON REMOVER and push through bore.
6) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Bore Tech's RIMFIRE BLEND is a specially formulated bore cleaner that effectively cleans lead and powder fouling with ease. Through advanced chemical research RIMFIRE BLEND surpasses the rigorous demands of Rimfire, Cowboy Action and Cast Bullet shooters.

RIMFIRE BLEND‘s proprietary formulation is accomplished through a combination of chemicals that contains no ammonia, no offensive odours and is 100% biodegradable. It has the ability to simultaneously cut through the layers of lead, wax and carbon fouling that builds on the barrel walls.

RIMFIRE BLEND uses an exclusive approach in order to penetrate and lift the lead off of the barrel‘s surface. This approach allows the chemical to perform all the "grunt" work, allowing for minimal time spent brushing and patching. You will be surprised when you see strands of lead pouring out of the end of your bore.

Whether your barrel is steel, stainless steel, or lined, RIMFIRE BLEND is 100% safe for an infinite period of time.

RIMFIRE BLEND is another addition to Bore Tech‘s premium, state of the art bore cleaning line.

USE INSTRUCTIONS
UNLOAD FIREARM
1) Wet 3 to 4 patches with RIMFIRE BLEND and push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting brush saturated with RIMFIRE BLEND.
3) Then repeat Step1 and let RIMFIRE BLEND soak 5 to 10 minutes.
4) Finally, push dry patches through the bore until they come out clean.
5) Before storing firearm, dampen a patch with RIMFIRE BLEND and push through bore.
6) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Bore Tech’s CHAMELEON GEL (pronounced like the colour changing lizard) is a cutting edge colour indicating cleaner and polish that effectively removes heavy carbon, copper, lead, and plastic fouling. The exclusive chemical and mechanical cleaning technology is non-harming, non-embedding, biodegradable, and 100% safe for all barrel types. The easy to use gel formulation requires no mixing and cleans up quickly for a shiny barrel every time.
CHAMELEON GEL is recommended for extremely fouled bores, heavy carbon fouling in throat area, every 250-500 rounds to polish bore, and heavy moly fouling in bores.
Unlike any other “bore paste” cleaner, the CHAMELEON GEL is the first to utilize colour indicating, chemical, cleaning technology. This in conjunction with the PROVEN, 100% barrel safe polish, effectively cleans and provides the shooter with what type of fouling is in the bore and when the bore is clean. This combination of both chemical and mechanical action safely cleans bore in half the time of traditional bore paste cleaners.
The standard mechanical abrasion technology used for decades in traditional bore pastes turns black whether the barrel is copper fouled, carbon fouled or 100% clean. Shooters have no indication of their bore condition and in turn over use the traditional bore pastes which will damage barrel steels.
If you want to quickly, effectively and safely clean your barrels, Bore Tech’s CHAMELEON GEL is the cutting edge cleaner / polish you have been looking for.

USE INTRUCTIONS
UNLOAD FIREARM
1) First, wet bore with one or two patches of C4 Carbon Remover, Cu+2 Copper Remover or ELIMINATOR Bore cleaner.
2) 2) Use the correct calibre jag and undersized patches or an undersized nylon brush with a patch wrapped around.
3) Next, evenly coat a patch with CHAMELEON GEL.
4) Make one full length pass per treated patch while short stroking the bore back and forth in two inch increments.
5) Observe colour (S) of CG to indicate fouling type in barrel.
a. Blue/Green = Copper fouling.
b. Black = Carbon fouling.
c. Grey = lead / moly.
d. White = Clean bore.
6) Let CG remain in barrel for 3 – 5 minutes.
7) Push two or three wet patches of C4, Cu+2 or ELIMINATOR through the bore to remove CG and observe patch colour.
8) Repeats steps 1 through 7 as necessary.
9) When GC remains white in colour, bore is clean.
10) Before storing firearm, apply rust and corrosion inhibitor.
  • Ex Demo & Used items at MARCH

View More

Similar items

Bore Tech Inc
MagnetoSpeed Chronographs
From £195.00 - £375.00
Bore Tech Inc
Magnetospeed Accessories
From £5.00 - £162.00
Bore Tech Inc
LabRadar - My Personal Radar
From £40.00 - £582.00
Bore Tech Inc
TAB Gear Rear Bags
From £28.80 - £36.00
Bore Tech Inc
TAB Gear Zipper Rear Bag
From £38.40 - £50.40

Enter your email address below to join our mailing list